KwiKool KPO12-23 Portable Air Conditioner

• Cooling capacity: 135,000 BTU/hr
• Condenser Airflow: 5500 cfm
• Voltage: 208/230/3
• Operating Temperatures: 65-110 F 50%RH
• Refrigerant: 407C

The KwiKoolKPO12-23 (nominal 10-ton or 135,000 BTU)  is a compact portable 32 inches wide and will fit through a standard 36-inch door. This small footprint that is ideal for difficult applications that require moving cold air to a hard to reach heat load, such as a sealed interior room. The KPO Series KwiKool’s Indoor/Outdoor Line of portables provide solutions for large capacity cooling. They provide temporary cooling needed when dedicated A/C units are incapacitated and in the midst of repair or service. 

The KPO12-23 model is rugged units which provide continuous and reliable, powerful blowers. They can be placed outdoors and ducted into the building or placed inside and ducted into an interior room. The KPO Series offers advanced airflow capabilities, up to 50 feet cold air return and supply and up to 65 feet of hot air exhaust ducting. Even when ambient temperatures are extreme, you can rely on The KPO Series.

• 135,000 btuh capacities
• Compact yet Super Powerful
• HD 16 gauge insulated G90 galvanized and epoxy powder coated cabinet mounted to a 12 gauge Skid for optimum durability, efficiency, low maintenance and quiet operation
• HD Swivel and Locking Casters
• Narrow compact size allows the KPO to go through a standard doorway
• High Static Hyperdrive evaporator fans capable of running 100 foot of duct
• Wide Operating range of 60ºF-110ºF
• Low ambient condensing temperature controls utilizing Variable frequency drive technologies
• ETL and CETL listed to UL and CSA standards
• Multi-function Digital control with a large, easy-to-read LCD display
• Internal high lift condensate pumps for total condensate flexibility
• Condensate overflow protection
• Thermostatic Expansion Valve
• Heavy duty compressor with automatic restart and short cycle protection
• Motors and compressors have overload protection
• High-pressure safety with manual reset
• Low-pressure safety with automatic reset
• Automatic freeze protection using hot gas bypass and fan cycling
• Rifle tube coils for efficient heat transfer
• Sight glass with moisture indicator
• Filter dryer for Moisture protection
• Easy access Service Doors
• Shraeder service ports
• MADE IN USA

Cooling Capacity

• BTU/hr @ 95F at 60% RH: 135,000 (10-Ton)

Compressor Data

• Compressor Type: Hermetic Recip.
• Operating Temperatures: 60-110 F 50%RH
• Refrigerant: 407C

Fan Data

• Evaporator
• Fan Type (Centrifugal): Direct Drive
• Air Flow (CFM): 5500
• Supply Air Device: 2-12" flange for supply duct.
• Return Air Device: 2-12" flange for return duct
• Condenser
• Fan Type (Centrifugal): Direct Drive
• Air Flow (CFM): 8500
• Condenser Exhaust Flange: 20"
• Condenser Duct Max. Length: 100'

Electrical Data

• Power Supply (Volts): 208/230 Three Phase
• Current Consumption (Amps): 63.25/57.50
• Power Consumption (KW): 20.5
• Maximum Circuit Breaker (Amps): 100
• Recommended Breaker Size: 80
• Minimum Circuit Ampacity (Amps): 72.1
• Min./Max. Voltage: 195-225/210-250
• Power Connection: Color Coded Cam Locks
• Plug Configuration: Hard Wired

Dimensional Data

• Width x Depth x Height (Inches): 32" x 64" x 60"
• Weight (Lbs.): 1080
• Shipping Weight (Lbs.): 1180

Safety Device Data

• Compressor Overload: Internal
• Fan Motor Overload: Automatic Internal
• Evaporator Freeze Protection: Hot Gas Bypass
• High Pressure Switch: Manual
• Low Pressure Switch: Automatic
• Compressor Short Cycle: Yes
• Automatic Restart: Yes
• Thermostat Type: Microprocessor/Digital
• Condensate Pump Overflow: Yes
• Condensate Tank Overflow: Yes

• Owners Manual
• Spec Sheet

1 year from the date of purchase, KWIKOOL PORTABLE COOLING SYSTEMS. KwiKool warrants that its products shall be free from defects in material and workmanship. If equipment develops such defects in this period, it will be repaired at the rates and time established by us or replaced at our discretion. The effective warranty date is the ship date of the unit or the installation date if properly documented; but not to exceed (18) eighteen months of ship date.