null

Categories

Quick links

My Account

Goodman 4 Ton 100 MBTU/H 13.4 SEER2 Packaged Dual Fuel, 208/230 Volt, GPDM34810041

(No reviews yet) Write a Review
$5,173.00

Free Shipping

Free shipping to lower 48 states only, otherwise, please call for additional pricing.
Reviews
Loading review.....
Description
  • Overview
  • Features
  • Tech Specs
  • PDFs
  • Warranty
  • Reviews

gdmnlogo.png

  • Model: GPDM34810041
  • Cooling BTUH (Total): 44,500 BTU
  • Cooling BTUH (Sensible): 34,000 BTU
  • Cooling SEER2 / EER2: 13.4 / 10.6
  • Voltage/Phase (60 Hz): 208/230-1

Standard Features

  • Combines cooling with heat pump and gas heating for optimal year-long performance
  • Energy-efficient scroll compressor
  • Heavy-duty aluminized-steel heat exchanger
  • Multi-speed ECM indoor blower motor
  • All-aluminum evaporator coil
  • Two-stage gas valve; natural gas with easy conversion to propane with accessory kit
  • Power-assisted combustion
  • High and low-pressure switch protection
  • Direct spark ignition system includes a microprocessor based control for the entire ignition sequence
  • All blower operation and all safety circuits complete with self-diagnostics
  • All models comply with California Low NOx emission standards
  • This furnace does not comply with the SCAQMD Rule 1111 nor the SJVAPCD Rule 4905 14 ng/J NOx emission limit and therefore is not eligible for installation in California’s South Coast Air Quality Management District (SCAQMD) nor the San Joaquin Valley Air Pollution Control District (SJVAPCD)
  • AHRI Certified; ETL Listed

Cabinet Features

  • Fully insulated heavy-gauge, zinc-coated steel cabinet with UV-resistant powder-paint finish
  • Louvered metal panel condenser coil protection
  • Aluminum foil-facing internal insulation reinforced with fiberglass scrim
  • Compressor sound blanket
  • Convenient access panels
  • One roof curb fits all units
  • Bottom, 2” high base rails for easier handling
  • All models fit a standard-size pick-up truck
  • When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
  • Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 19
  • One footprint for all tonnages

Cooling Capacity

  • Total BTU/h: 44,500
  • Sensible BTU/h: 34,000
  • SEER2 / EER2: 13.4 / 10.6
  • Decibels: 79
  • AHRI Numbers: 209319585

Heating Capacity

  • Heating Capacity, BTU/hr (47°F / 17°F): 43,285 / 25,425
  • C.O.P. (47°F / 17°F): 3.50 / 2.40
  • HSPF2: 6.7

Gas Heating

  • High-Fire Input/Output (BTU/hr): 100,000 / 81,000
  • Low-Fire Input/Output (BTU/hr): 75,000 / 60,750
  • AFUE (%): 81
  • Temperature Rise Range (°F): 35 - 65/ 35 - 65
  • # of Burners: 5
  • Primary/Auxiliary Limit Setting (°F): 170/150
  • Roll-out Limit Setting (°F): 350

Evaporator Motor

  • Type: ECM
  • Wheel (D x W): 11" x 10"
  • No. of Speeds: 5
  • Motor Horsepower / FLA: 3/4 / 5.4
  • Motor Speed Tap (Cooling and Heat Pump): T4
  • Nominal CFM (Cooling and Heat Pump): 1300

Evaporator Coil

  • Face Area (ft): 5.7
  • Rows Deep/Fins per Inc: 4/14
  • Expansion Device (Orifice Diameter in.): 0.076
  • Filter Size (ft): 5.1
  • Drain Size (NPT): 3/4
  • Refrigerant Charge - R-410A (oz): 148

Condenser Coil

  • Face Area (ft): 15.3
  • # Rows / Fins per Inch: 2 / 16
  • Expansion Device (Orifice Diameter in.: 0.060

Condenser Motor / Fan

  • Fan Diameter / # of Blades: 22.00" / 3
  • Outdoor Nominal CFM: 3,200
  • Motor Horsepower - RPM: 1/4 - 1075
  • Motor FLA: 1.4

Compressor

  • Type: Scroll
  • Stage: Single
  • Run Load Amps / Locked Rotor Amps: 19.9 / 109.0

Electrical Data

  • Voltage-Phase (Frequency 60Hz): 208/230-1
  • Min. Circuit Ampacity: 31.7
  • Maximum Overcurrent Protection: 50
  • Entrance Size Power Supply: 1 1/8
  • Entrance Size Control Voltage: 7/8

Weights & Dimensions

  • Product Height (in.): 42 - 3/4 in
  • Product Width (in.): 47 in
  • Product Depth (in.): 51 in
  • Operating Weight (lbs.): 525 lbs
  • Shipping Weight (lbs.): 545 lbs
  • 10 Years Parts Limited Warranty (ONLY VALID IF INSTALLATION DONE BY LICENSED CONTRACTOR)
  • 20 Year Heat Exchanger Limited Warranty (ONLY VALID IF INSTALLATION DONE BY LICENSED CONTRACTOR)
%%GLOBAL_CommentsHTML%%
{!-- --}}
Back To The Top