Free Shipping
Description
- Overview
- Features
- Tech Specs
- PDFs
- Warranty
- Reviews
- Model: GPDM33608041
- Cooling BTUH (Total): 34,200 BTU
- Cooling BTUH (Sensible): 27,240 BTU
- Cooling SEER2 / EER2: 13.4 / 10.6
- Voltage/Phase (60 Hz): 208/230-1
Standard Features
- Combines cooling with heat pump and gas heating for optimal year-long performance
- Energy-efficient scroll compressor
- Heavy-duty aluminized-steel heat exchanger
- Multi-speed ECM indoor blower motor
- All-aluminum evaporator coil
- Two-stage gas valve; natural gas with easy conversion to propane with accessory kit
- Power-assisted combustion
- High and low-pressure switch protection
- Direct spark ignition system includes a microprocessor-based control for the entire ignition sequence
- All blower operation and all safety circuits complete with self-diagnostics
- All models comply with California Low NOx emission standards
- This furnace does not comply with the SCAQMD Rule 1111 nor the SJVAPCD Rule 4905 14 ng/J NOx emission limit and therefore is not eligible for installation in California’s South Coast Air Quality Management District (SCAQMD) nor the San Joaquin Valley Air Pollution Control District (SJVAPCD)
- AHRI Certified; ETL Listed
Cabinet Features
- Fully insulated heavy-gauge, zinc-coated steel cabinet with UV-resistant powder-paint finish
- Louvered metal panel condenser coil protection
- Aluminum foil-facing internal insulation reinforced with fiberglass scrim
- Compressor sound blanket
- Convenient access panels
- One roof curb fits all units
- Bottom, 2” high base rails for easier handling
- All models fit a standard-size pick-up truck
- When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
- Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 19
- One footprint for all tonnages
Cooling Capacity
- Total BTU/h: 34,200
- Sensible BTU/h: 27,240
- SEER2 / EER2: 13.4 / 10.6
- Decibels: 79
- AHRI Numbers: 209319582
Heating Capacity
- Heating Capacity, BTU/hr (47°F / 17°F): 34,400 / 21,300
- C.O.P. (47°F / 17°F): 3.16 / 2.33
- HSPF2: 6.7
Gas Heating
- High-Fire Input/Output (BTU/hr): 80,000 / 64,800
- Low-Fire Input/Output (BTU/hr): 60,000 / 48,600
- AFUE (%): 81
- Temperature Rise Range (°F): 35 - 65/ 25 - 55
- # of Burners: 4
- Primary/Auxiliary Limit Setting (°F): 150/150
- Roll-out Limit Setting (°F): 350
Evaporator Motor
- Type: ECM
- Wheel (D x W): 10" x 9"
- No. of Speeds: 5
- Motor Horsepower / FLA: 1/2 / 3.8
- Motor Speed Tap (Cooling and Heat Pump): T4
- Nominal CFM (Cooling and Heat Pump): 1050
Evaporator Coil
- Face Area (ft): 4.35
- Rows Deep/Fins per Inc: 3/14
- Expansion Device (Orifice Diameter in.): 0.068
- Filter Size (ft): 4.2
- Drain Size (NPT): 3/4
- Refrigerant Charge - R-410A (oz): 110
Condenser Coil
- Face Area (ft): 12.2
- # Rows / Fins per Inch: 2 / 16
- Expansion Device (Orifice Diameter in.: 0.047
Condenser Motor / Fan
- Fan Diameter / # of Blades: 22.00" / 3
- Outdoor Nominal CFM: 2,500
- Motor Horsepower - RPM: 1/4 - 837
- Motor FLA: 1.3
Compressor
- Type: Scroll
- Stage: Single
- Run Load Amps / Locked Rotor Amps: 16.0 / 91.9
Electrical Data
- Voltage-Phase (Frequency 60Hz): 208/230-1
- Min. Circuit Ampacity: 25.1
- Maximum Overcurrent Protection: 40
- Entrance Size Power Supply: 1 1/8
- Entrance Size Control Voltage: 7/8
Weights & Dimensions
- Product Height (in.): 42 - 3/4 in
- Product Width (in.): 47 in
- Product Depth (in.): 51 in
- Operating Weight (lbs.): 440 lbs
- Shipping Weight (lbs.): 460 lbs
- 10 Years Parts Limited Warranty (ONLY VALID IF INSTALLATION DONE BY LICENSED CONTRACTOR)
- 20 Year Heat Exchanger Limited Warranty (ONLY VALID IF INSTALLATION DONE BY LICENSED CONTRACTOR)
%%GLOBAL_CommentsHTML%%
