Goodman 3.5 Ton 100 MBTU/H 15.2 SEER2 Packaged Gas/Electric, 208/230 Volt, GPGM54210041

• Model: GPGM54210041
• Cooling BTUH (Total): 41,000 BTU
• Cooling BTUH (Sensible): 31,000 BTU
• Cooling SEER2 / EER2: 14.7 / 11.2
• Voltage/Phase (60 Hz): 208/230-1

Standard Features

• Durable, corrosion-resistant T-140 aluminized steel tubular heat exchanger
• High-efficiency two-stage scroll compressor
• Convertible airflow: horizontal or downflow application
• Variable-speed ECM indoor blower motor
• Copper tube/aluminum fin condenser coil
• All-aluminum evaporator coil on 2- to 4-ton units
• Aluminum-copper evaporator coil on 5-ton units
• Power-assisted combustion
• Loss-of-charge protection & high-pressure switch
• Two-stage gas valve; natural gas with easy conversion to propane with accessory kit
• Direct spark ignition system includes a microprocessor-based control for the entire ignition sequence
• All blower operation and all safety circuits complete with self-diagnostics
• All models comply with California Low NOx emission standards (40ng/J NOx
• This furnace does not comply with the SCAQMD Rule 1111 nor the SJVAPCD Rule 4905 14 ng/J NOx emission limit and therefore is not eligible for installation in California’s South Coast Air Quality Management District (SCAQMD) nor the San Joaquin Valley Air Pollution Control District (SJVAPCD)
• AHRI Certified; ETL Listed

Cabinet Features

• Fully insulated heavy-gauge, zinc-coated steel cabinet with UV-resistant powder-paint finish
• Aluminum foil-facing internal insulation reinforced with fiberglass scrim
• Convenient access panels
• One roof curb fits 2-4 ton units
• Bottom, 2” high base rails for easier handling
• 2-4 ton models fit a standard-size pick-up truck
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
• Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 19

Cooling Capacity

• Total BTU/h: 41,000
• Sensible BTU/h: 31,000
• SEER2 / EER2: 14.7 / 11.2
• Decibels: 80
• AHRI Numbers: 209319567

Heating Capacity

• High-Fire Input / Output: 100,000 / 81,000
• Low-Fire Input / Output: 75,000 / 60,750
• AFUE: 81
• High/Low Temperature Rise Range: 35-65/35-65
• No. of Burners: 5

Evaporator Motor

• Type: ECM
• Wheel (D x W): 11" x 10"
• Indoor Nominal CFM: 1250
• No. of Speeds: 5
• Horsepower: 3/4

Evaporator Coil

• Face Area (ft): 5.7
• Rows Deep/Fins per Inc: 4/14
• Piston Size (Cooling): TXV
• Filter Size (ft): (2)20X20X1
• Drain Size (NPT): 3/4"
• Refrigerant Charge (oz.): 143

Condenser Fan/Coil

• Horsepower - RPM: 1/4 - 1075
• Diameter / # of Blades: 22" / 3
• Outdoor Nominal CFM: 3,200
• Face Area (ft): 14.9
• Rows Deep/Fins per Inch: 2/16

Compressor

• Quantity: 1
• Type: Scroll
• Stage: Two
• Compressor RLA/LRA: 19.9 / 150.7

Electrical Data

• Voltage-Phase (Frequency 60Hz): 208/230-1
• Indoor Blower FLA: 6.8
• Outdoor Fan FLA/LRA: 1.4/3.2
• Min. Circuit Ampacity: 33.1
• Max. Overcurrent Protection: 50 amps

Weights & Dimensions

• Product Height (in.): 42 - 3/4 in
• Product Width (in.): 47 in
• Product Depth (in.): 51 in
• Operating Weight (lbs.): 490 lbs
• Shipping Weight (lbs.): 505 lbs

• Product Specs
• Limited Warranty (ONLY VALID IF INSTALLATION DONE BY LICENSED CONTRACTOR)

• 10 Years Parts Limited Warranty (ONLY VALID IF INSTALLATION DONE BY LICENSED CONTRACTOR)
• 20 Year Heat Exchanger Limited Warranty (ONLY VALID IF INSTALLATION DONE BY LICENSED CONTRACTOR)