Friedrich D24YJ Concealed Ducted 24K Heat Pump

• Model: D24YJ
• COOLING CAPACITY: 24,000 BTU
• HEATING CAPACITY: 27,000 BTU
• EFFICIENCY: 17.0 SEER
• VOLTAGE: 208/230/60/1
• COOL AREA (SQ. FT.): 800

The Friedrich D24YJ Concealed Ducted Heat Pump feature variable speed compressors and fans (called Inverter Technology), which reach the desired temperature faster, maintain it more accurately and reduce energy consumption with fewer compressor startups.

The Advantages of Precision Inverter System Single Zone, Friedrich ductless is superior to conventional systems. Precision Inverter technology varies the compressor, the outdoor and the indoor fan speeds, eliminating constant compressor start-ups/shutdowns that traditional systems require to maintain the set temperature. Soft start technology starts the compressor with minimal amperage at start up, saving energy versus compressors utilzing locked rotor amperage (LRA). This is especially beneficial in multizone systems where room temperature set points vary and some indoor units may be turned off in unoccupied rooms. Each system can adjust capacity and cooling output to provide only the amount of cooling needed at a given time. The result is optimal comfort with low energy costs.

Attractive and high efficiency options for cooling and heating residential and light commercial spaces. Wall-mounted models mount high on an exterior wall. The attractive, neutral finish blends well with just about any decor. The units can be used individually.

Super High Efficiency and Zone Cooling Capability With Friedrich Ductless Split Systems, you can cool and heat single or multiple rooms more quietly and efficiently than window air conditioners or traditional central air systems, and without the expense of ductwork. You can control individual room temperatures, and heat or cool only the areas that are occupied. The indoor cross-flow fan and a low vibration compressor provide ultra quiet operation indoors and outdoors. Convenient installation features that will get your ductless running in no time.

General

• Cooling: 24,000 BTU
• Capacity Cooling (Min.~Max.): 9,700 ~ 26,700 BTU
• Capacity Heating@47°F: 27,000 BTU
• Capacity Heating@17°F: 17,600 BTU
• Capacity Heating (Min.~Max.): 10,900 ~ 30,000 BTU
• Cooling Amps: 15.1
• Heating Amps: 15.1
• Sensible Heat Ratio: 0.68
• SEER: 17.0
• EER: 12.0
• Voltage: 208/230/60/1
• Refrigerant Type: R410A
• Moisture Removal (Pts/h): 7.0
• Airflow (Low/Med/High) (CFM): 530/618/688
• Sound Rating - Indoor (H/M/L)(dB-A): 38/36/35
• Sound Rating - Outdoor (dB-A): 62
• Operating Range Heating (°FDB): 5˚ ~ 118˚
• Operating Range Cooling (°FWB): -4˚ ~ 64˚

Indoor Unit

• Indoor Unit: MD24Y3J
• Dimensions (H x W x D): 11-3/4" X 46-9/16" X 17-3/4"
• Net Weight: 73.0 lbs

Outdoor Unit

• Outdoor Unit: MR24UY3J
• Dimensions (H x W x D): 32-7/8" X 37-7/16" X 13"
• Net Weight: 132 lbs

Line Sets

• Liquid Line O.D.: 3/8"
• Suction Line O.D.: 5/8"
• Min./Max. Line Length: 25~164 ft

Electrical Data

• Power Source (V/Hz/Phase): 208/230/60/1
• Minimum Ampacity (A): 18.1
• Cooling Watts (W): 2000
• Max. Td Fuse/Breaker (A): 30
• Power & Communication Cable (No. x AWG): 4 x 14

Features

• Precision Inverter technology (variable speed compressor).
• Soft start compressor.
• BLDC motor.
• Internal condensate pump with 27 1/2" lift* included.
• Cooling/Heating/Fan mode.
• Built-in low ambient standard, down to 5º F (Cooling mode).
• Low ambient operation down to -4º F (Heating mode).
• Dry mode.
• 3 Fan speeds.
• Auto restart.
• Auto changeover.
• Control lock function on controller.
• External Static Pressure Range (ESP): 24,000 (0.1 - 0.78) WC.

• Brochure
• Owner Manual
• Install Manual
• Operation Manual
• Submittal
• Service Guide Indoor
• Service Guide Outdoor
• Warranty Doc