CellarPro AH18Sx-EC Air Handler Split Outdoor #34209

• Cooling Capacity @ 55 F: 15,500 BTUH
• Condensing Unit dBA: 61
• Dedicated Circuit: 15 + 25 Amp
• Power: 208V/1PH/60HZ or 230V/1PH/60HZ
• Refrigerant: R134A

CellarPro AH18Sx-EC Air Handler Cooling System (P/N 34209). Our Split Air Handler is rated for exterior usage and designed for cellars up to 7000* cubic feet, providing ducted refrigeration specifically designed for wine cellars.

All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space - it must come from space outside the cellar.

♦ View more of our CellarPro Products

♦ Click to view more CellarPro Units

• Now with energy-efficient EC Fans on the cold side
• Evaporator features an aluminum body for light weight, corrosion resistance and aesthetics
• Quick-release hardware simplifies internal access
• Scroll compressor provides high-reliability, high efficiency and low noise
• Insulated evaporator compartment provides maximum thermal efficiency.
• A-frame evaporator construction increases cooling capacity and reduces power consumption.
• Speed-optimized ECM blower motor in a draw-thru configuration provides even air distribution across the evaporator coils with 1175 CFM
• Using 12" diameter R6 insulated flex ducting, the Evaporator can be ducted up to 100 equivalent feet (50 equivalent feet per duct)
• Using R6 insulated hard ducting, the Evaporator can be ducted with maximum external static pressure of 0.3"wg and minimum cross sectional area of 113 sq inches.
• Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion.
• Stainless steel condensate pan and condensate safety switch protects against condensate overflow
• Low RPM minimizes air noise and motor HP consumption
• Evaporator blower assembly is mounted to an internal chamber to further reduce noise
• Includes Class 2, 24VAC control circuit with all necessary contactors, fuses and/or circuit breakers
• Compatible with WiFi-enabled 24V Thermostats (sold separately) to control and display cellar temperature
• Optional integrated humidity module includes a Digital IAQ Humidistat that allows the cellar humidity to be set from 5% to 70% in 5% increments
• Optional integrated heating system provides heating instead of cooling when cellar temperatures drop below the setpoint.
• Air cooled condensing unit enclosure suitable for indoor or outdoor installations
• The Evaporator and Condensing Unit are factory-pressurized and shipped with dry nitrogen to ensure leak-free installation.
• CellarPro's 2-Year/5-Year Warranty, the most thorough in the industry, provides 2 years' coverage on parts (labor is not included) and 5 years on the compressor.
• An optional Extended Warranty (P/N 31489) is available for additional protection.
• ETL Tested and Certified to rigorous UL Standards for safety.

• Model: AH18Sx-EC
  
• Capacity (Cu Ft)*: 7,000
• Compressor Size (HP): 1.5 Ton
• BTUH @ 55F: 15,500
• Condensing Unit Decibels: 61 dbA
• Evaporator Decibels
• Ducted: 67 dbA
• Non-Ducted: 78 dbA
• Application: Indoor/Outdoor
• Cold Intake/Exhaust: Right Side/Front
• Hot Intake/Exhaust: Rear/Front
• Power: 208V/1PH/60HZ or 230V/1PH/60HZ
• Startup Amps: 75.0
• Max Ambient Temp F: 110
• Decibels (L/H): 67
• Dedicated Circuit: 15-Amp & 25-Amp
• Refrigerant: R134a

Size (W x D x H ‐inches) / Weight (lbs)

• Evaporator: 41 3/8w x 36 5/8d x 22 3/8h/ 156 lbs
• Condensing: 16 5/8w x 40 1/2d x 33 1/8h/ 219 lbs (no humidifier)

• Cold side exhaust is on the front and intake is on the right side.
• The system requires either 208V/1PH/60HZ or 230V/1PH/60HZ dual power supplies, with a 15 amp circuit for the evaporator module, and a 50 amp dedicated circuit for the condensing unit. Either 208V or 230V must be specified when ordering the system.
• 24VAC control wiring is required between the main temperature controller and the evaporator. No communication wiring is required between the evaporator and the condensing unit.
• The system includes a refrigerant pump-down solenoid valve to prevent liquid slugging.
• Units are evacuated and charged with dry nitrogen.
• The Evaporator operating range is 45F to 62F cellar temperature without the Integrated Humidifier, and 51F.to 62F with the Integrated Humidifier
• An optional integrated humidification system and an optional heating system are available for additional cost. These options must be factory installed and require additional power. Please consult the Owners Manual for specific power requirements.
• The evaporator should never be exposed to temperatures below 32F.
• The unit includes a mounted defrost controller that manages the defrost cycle, which is time initiated, temperature terminated with a factory default of 1 hour.
• Access to the left and right side of the evaporator unit is required for installation and service.

• Spec Sheet
• Owner's Manual
• Evaporator/Condensing Unit Cut Sheet
• Installation Checklist
• Warranty Overview