CellarPro 8000Swc-EC Split System Water Cooled #19216

• Cooling Capacity @ 55 F: 6600 BTUH
• Condensing Unit dBA: 63
• Dedicated Circuit: 20 Amp
• Power: 115VAC/ 60Hz
• Refrigerant: R134A

CellarPro 8000Swc-EC Cooling Unit (P/N 7649). NOW WITH ENERGY-EFFICIENT EC FANS! CellarPro engineered the 8000Swc-EC cooling system to provide maximum cooling power and adjustable humidity control for cellars up to 2,000 cubic feet. Split refrigeration systems separate the evaporator from the condensing unit, allowing the noise and heat from the condensing unit to be located away from interior living areas. The 8000Swc-EC includes a variable-speed fan on the evaporator with a low setting for quieter operation and a high setting for maximum power. The condensing unit requires a continuous flow of water to cool itself, and does not need ventilation like air-cooled units.

♦ View more of our CellarPro Products

♦ Click to view more CellarPro Units

• Now with energy-efficient EC Fans on the cold side, save $198.88 in annual energy costs vs AC fans (assumes 75% runtime and $0.15/kWh)
• This unit is designed to separate the heat and noise from the condensing unit from interior living spaces.
• Our Evaporators are built with high-output centrifugal fans which include variable speed settings for your choice of maximum cooling power at the high fan speed, or quieter operation (53.7 decibels) at the low fan speed.
• Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
• Extra-large coils generate maximum cooling power inside the cellar.
• Excess condensate is managed through a 1/2" drain line that exits from a choice of knockouts in the evaporator.
• Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion.
• Intuitive LED display panel mounted on the evaporator with digital programmable thermostat is simple and easy to use. Remote thermostat is available as an upgrade.
• Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
• Temperature set point range is 47F to 62F when the cooling unit is properly sized.
• Unit operates with minimal vibrations and less noise than comparable units from competitors.
• Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
• Common dedicated 20-amp circuit is required to power the unit.
• Adjustable mounting brackets are included as standard equipment, and multiple knockouts and access points ensure easy installation.
• Factory-installed Expansion Valve and Liquid Line Solenoid Valve (optional) ensure maximum operating precision and range.
• Removable steel case and refrigerant access valve provides access to the internal components for servicing and repair.
• Sight Glass and Liquid Line Filter/Drier are included for easy installation and maintenance.
• Oversized Receiver allows for long line sets up to 100 equivalent feet and up to 30 vertical feet.
• Auto-reset high-pressure switch protects the system by interrupting power to the compressor when system pressure is too high.
• Evaporator and Condensing Unit are factory-pressurized and shipped with dry nitrogen to ensure leak-free installation.
• CellarPro's 2-Year/5-Year Warranty, the most thorough in the industry, protects the unit against manufacturing defects.
• An optional Extended Warranty (P/N 7528) is available for additional protection.

• Model: 8000Swc-EC
  
• Cellar Size(Nominal Cu Ft)*: 2000
• Compressor Size (HP): 3/4 Ton
• BTUH @ 55F / Evaporator Decibels
• Low Fan Speed: 5860 / 56 dbA
• Med Fan Speed: 6230 / 63 dbA
• High Fan Speed: 6600 / 70 dbA
• Condensing Unit Decibels: 63 dbA
• Power: 115V AC/ 60Hz
• Amps (Starting/Running): 48.0/ 10.3
• Dedicated Circuit: 20-Amp
• Refrigerant: R134a

Size (W x D x H ‐inches) / Weight (lbs)

• Evaporator: 46.4w x 14.4d x 13.2h/ 85 lbs
• Condensing: 14w x 21.4d x 10.5h/ 82 lbs

• CellarPro 8000Swc-EC units are designed to be installed with the evaporator inside the cellar, and the condensing unit in a remote location.
• Our Split refrigeration systems offer a choice of wiring:
• The Condensing unit can be electronically controlled by and wired to the Evaporator (single power source on the Evaporator side). This configuration requires a 15-amp dedicated circuit breaker.
• The Condensing unit can be controlled by a Solenoid valve (dual power source, one each to the Evaporator and Condensing units.) This configuration requires the evaporator to be wired to a 15-amp circuit breaker, and the condensing unit to be wired to a dedicated 15-amp circuit breaker.
• When the control panel is difficult to access, we offer a remote control display kit which is wired to the cooling unit and allows the digital display to be mounted inside or outside the cellar.
• The condensing unit requires a continuous flow of water to cool itself.
• The evaporator should never be exposed to temperatures below 32F.
• Access to the left and right side of the evaporator unit is required for installation.
• A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down.

• Owner's Manual
• Product Brochure
• Cut Sheet
• Evaporator Mounting Instructions
• Refrigerant Piping Handbook
• Installation Checklist
• Warranty Overview

• Split Systems: CellarPro Split Systems