CellarPro 2000VSx-ECX Wine Cellar Cooling Unit (Exterior) #27057

• Cooling Capacity @ 55 F: 1886 BTUH
• Dedicated Circuit: 15 Amp
• Power: 115VAC/ 60Hz
• Cooling Unit dBA: 61.5
• Refrigerant: R134A

CellarPro 2000VSx-ECX Cooling Unit (P/N 27057). NOW WITH ENERGY-EFFICIENT EC FANS! CellarPro engineered the low profile 2000VSi cooling unit specifically for installations in wine cellars with limited space and exterior exposure for the hot side.

Just 14 1/8-inches wide and 13 1/4-inches tall, the 2000VSi cooling unit will fit in between studs and/or above door frames. Dual independent variable-speed fans offer flexibility to trade-off between super-quiet operation vs maximum performance.

All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space - it must come from space outside the cellar.

♦ View more of our CellarPro Products

♦ Click to view more CellarPro Units

• Features energy-efficient EC Fans on both the cold and hot sides
• Intuitive LED display panel mounted on the evaporator with digital programmable thermostat is simple and easy to use. Remote thermostat is available as an upgrade
• Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
• Commercial-grade Electrofin coating protects the evaporator and condenser coils from leaks and corrosion.
• Low profile for maximum flexibility
• Shallow height fits above doors: 13 1/4" H
• Shallow width fits in between studs: 14 1/8" W
• Upgrades for exterior exposure
• Exterior weather hood to cover the rear of the cooling unit
• Coated condenser coils
• Commercial-grade Electrofin coating protects the evaporator and condenser coils from leaks and corrosion
• Cold-temperature compressor heater, allows exposure down to 20F
• Reusable aluminum filter
• Exterior-grade power cord
• Variable-speed fan inside the cellar
• 1886 BTUH on high fan speed
• 1713 BTUH on low fan speed
• Variable-speed fan outside the cellar
• 110F maximum intake temperature / 61.5 dBA on the high fan speed
• 100F maximum intake temperature / 55.5 dBA on the low fan speed
• Condensate management system
• Oversized stainless-steel drain pan
• 1/2" ID drain line for excess condensate
• Optional 100W heating element
• Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
• Temperature set point range is 47F to 62F when the cooling unit is properly sized.
• Unit operates with minimal vibrations and less noise than comparable units from competitors.
• Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
• With dual power sources and a 10-foot power cord, the unit can be plugged into a receptacle from either the front or the rear of the cooling unit, providing flexibility for most installations.
• Common dedicated 15-amp circuit is required to power the unit.
• Our easy-access air filter protects the condenser coils and increases the expected useful life of the cooling unit.
• Adjustable mounting brackets, included as standard equipment, ensure easy installation.
• Removable steel case and refrigerant access valve provides access to the internal components for servicing and repair.
• CellarPro's 5-Year Standard Warranty, the most thorough in the industry, protects the unit against manufacturing defects.
• An optional Extended Warranty (P/N 1836) is available for additional protection.
• ETL Tested and Certified to rigorous UL Standards for safety.

• Model: 2000VSx-ECX
  
• Cellar Size(Nominal Cu Ft)*: 400
• Compressor Size (HP): 1/4 Ton
• BTUH @ 55F: 1886
• CFM (High Fan Speed): 188
• Decibels (Low Fan Speed): 55.5/ 61.5
• Installation Environment: Outdoor (Shaded)
• Ambient Intake Range: -20** to 110F
• Power: 115V AC/ 60Hz
• Amps (Starting/Running): 22.2/ 4.52
• Dedicated Circuit: 15-Amp
• Refrigerant: R134a
• Drain Line: Included -1/2" ID
• Ducting - Cold Side: Yes –6" Diam.
• Ducting - Hot Side: Yes –6" Diam.

Dimensions

• Size (W x D x H -inches): 14.1 x 22.3 x 13.3
• Weight (lbs): 115

• CellarPro 2000VSx-ECX units are self-enclosed, fully-charged units designed to be installed through an external wall and sized to fit in between standard wall studs.
• 2000VSx-ECX units also can be located remotely from the cellar with the addition of one of our cold-side duct packages. Offered with or without insulated flex ducting, in a choice of configurations for low or high humidity conditions, our cold-side duct packages allow these cooling units to be ducted up to 50 equivalent feet (25' per duct). Ducting must be 8-inch (or greater) from start to finish.
When calculating equivalent feet, each 90-degree turn counts for 8 feet.
• For remote or inaccessible installations, we offer a remote control display kit which is wired to the cooling unit and allows the digital display to be mounted inside or outside the cellar.
• 2000VSx-ECX units require fresh air intake at the rear of the cooling unit, and are designed to handle environments ranging from 20F to 110F
• For installation in environments below 20F down to -20F, it will be necessary to add our Fan-Cycling Switch (P/N 6972).
• The front of the cooling unit should never be exposed to temperatures below 32F.
• A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down.

• Spec Sheet
• Owner's Manual
• Framing Diagram
• Dimensions Cut Sheet
• Duct Hood Drawings - As Ducted
• Warranty Overview